Parallella ボードへ OpenCV のインストール

大事なのは、まずは「FPGAの部屋」さんのブログを参考に

Parallella-16のSDカード・ドライブを8GBから16GBに拡張

先にしておかないと空き容量不足で死んじゃいます(^_^;)

install-opencv.sh

---

	arch=$(uname -m)if [ "$arch" == "i686" -o "$arch" == "i386" -o "$arch" == "i486" -o "$arch" == "i586" ]; then
	flag=1
	else
	flag=0
	fi
	echo "Installing OpenCV 2.4.10"
	mkdir OpenCV
	cd OpenCV
	echo "Removing any pre-installed ffmpeg and x264"
	sudo apt-get -y remove ffmpeg x264 libx264-dev
	echo "Installing Dependenices"
	sudo apt-get -y install libopencv-dev
	sudo apt-get -y install build-essential checkinstall cmake pkg-config yasm
	sudo apt-get -y install libtiff4-dev libjpeg-dev libjasper-dev
	sudo apt-get -y install libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev
	sudo apt-get -y install python-dev python-numpy
	sudo apt-get -y install libtbb-dev
	sudo apt-get -y install libqt4-dev libgtk2.0-dev
	sudo apt-get -y install libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev
	sudo apt-get -y install x264 v4l-utils ffmpeg
	echo "Downloading OpenCV 2.4.10"
	wget http://sourceforge.net/projects/opencvlibrary/files/opencv-unix/2.4.10/opencv-2.4.10.zip
	echo "Installing OpenCV 2.4.10"
	unzip opencv-2.4.10.zip
	cd opencv-2.4.10
	mkdir build
	cd build
	cmake -D CMAKE_BUILD_TYPE=RELEASE -D CMAKE_INSTALL_PREFIX=/usr/local -D WITH_TBB=ON -D BUILD_NEW_PYTHON_SUPPORT=ON -D WITH_V4L=ON -D INSTALL_C_EXAMPLES=ON -D INSTALL_PYTHON_EXAMPLES=ON -D BUILD_EXAMPLES=ON -D WITH_QT=ON -D WITH_OPENGL=ON ..
	make -j4
	sudo make install
	sudo sh -c 'echo "/usr/local/lib" > /etc/ld.so.conf.d/opencv.conf'
	sudo ldconfig
	echo "OpenCV 2.4.10 ready to be used"

---

この　install-opencv.sh　を実行。３～４時間かかりました。